GOST standard details

GOST  Document References:

Federal Law 184-FZ: About technical regulation

GOST 112-78: Meteorological glass thermometers

GOST 11823-91: Check valves for stipulated pressure of pn < 25 MPa (250 kgf/sm2)

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 13252-91: Swing check valves for Pnom £25 MPa (250 kgf/cm2). General specifications

GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)

GOST 13837-79: General purpose dynamometers

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 166-89: Vernier callipers. Specifications

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements

GOST 23866-87: Single-seated, double-seated and cellular

GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24570-81: Safety valves of stream and hot-water boilers. Technical requirements

GOST 25136-82: Pipe-line connections. Leak tightness test methods

GOST 25923-89: Butterfly control valves. Basic parameters

GOST 28338-89: Nominal bores (nominal sizes)

GOST 28343-89: Flanged steel ball valves

GOST 29329-92: Balance for static weightings

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5152-84: Gland Packing Specifications

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 6359-75: Meteorological barographs of aneroid type. Specifications

GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 52720-2007: Pipeline valves. Terms and definitions

GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

GOST R ISO 8573-1-2005: Compressed air. Part 1. Contaminants and purity classes

MI 2304-94: Metrological Monitoring and Supervision by Metrological Services of Juridical Persons

MU 2.1.5.1183-03: Sanitary and Epidemiological Surveillance over the Water Use in Industrial Water Supply Systems

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNAE G-7-019-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Leak tightness control. Gas and liquid methods

PR 50.2.006-94: Procedure for calibration of measurement equipment

SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. 

Quality control

The Document is Referenced By:

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 9544-2015: Pipeline valves. Leakage rates of valves

GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods

GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications

GOST R 54808-2011: Pipeline valves. Leakage rates of valves.

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55023-2012: Pipeline valves. Home regulators of pressure. General specifications

GOST R 55435-2013: Oil and oil products trunk pipeline transportation. Operation and maintenance. General principles

GOST R 55508-2013: Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 56006-2014: Pipeline valves. Testing and acceptance on objects of the gas main pipelines before commissioning.

  General technical requirements

MU 1.2.3.0057-2009: Guidelines. Composition and scope of testing of special pipe fittings for nuclear power plants

MU 1.2.3.07.0057-2016: Composition and scope of tests of special pipeline valves and actuators for nuclear power plants. Methodical instructions

ST TsKBA 007-2015: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

ST TsKBA 114-2014: Valves of pipeline all-ship. The procedure for the approval of valves with expired shelf life